What Is Easiest Way to Remove Undermount Sink

If y'all desire to supersede your bath undermount sink, you'll have to remove the former unit first. The procedure is DIY, and anyone tin do it. But you tin mess up things if you don't know how to go nearly it.

You first remove your sink plumbing assembly, disconnect the garbage disposal, permit loose the screws, clips, or brackets property your sink in place, and finally cutting the silicone bond holding your sink to the countertop.

Hither's a detailed guide on how to remove undercount bathroom sink:

Tools you'll need:

• Bucket
• Rug
• 2 x 4 lumber blocks
• Screwdriver
• Tongue and groove pliers
• Hammer
• Utility knife
• Chisel
• Heat gun

Step 1. Unhook the plumbing assembly from your electric current sink

You'll commencement need to disconnect the p-trap associates every bit role of making the sink easy to remove. Unscrew the end of the p-trap connecting to the drain tailpiece followed past the other finish leading to the brain drain in your bath wall.

Carefully get out the p-trap and tip it into a bucket to empty the h2o inside. At present disassemble the residue of the p-trap assembly. Make certain you stuff a rag into the drainpipe opening (in the wall) to keep the sewage gases from entering your bathroom.

Step ii. Remove the drain assembly

With the p-trap assembly downwards, you should now unhook the drain assembly. Employ pliers to loosen the drain assembly mounting nut, then unscrew and remove information technology with your hand.

Tap the strainer upward with a hammer to assist loosen the putty seal. At present pull the drain assembly out of the sink bleed opening from above.

Step 3. Secure the sink

Before yous disassemble your sink from the top, yous'll need to support it with 2×4 blocks and clamps. That is, you lot put a two×4 across the sink opening, pass a bar clamp through your sink bleed hole and hook it to the sink lesser and the 2×four.

But don't brand the clamping besides tight; leave enough playroom for your sink and then that you can easily pry it downward.

You tin also place a 5-gallon bucket upside downwards and stack a few forest blocks on top of it to human action as your back up.

This support is peculiarly essential for sinks made from heavy materials like bandage fe, composite though it's too advisable for use with other materials.

Good support volition assist prevent your sink from crashing to the floor and getting damaged or leaving dents on your bath floor.

Step 4. Remove the clips/screws/brackets

Unlike undermount sinks are held in place using screws, or clips, or brackets. Whatever you used for your sink, yous'll need to loosen information technology in this step to help yous easily remove your sink.

Go under your sink and locate the anchoring clips holding your nether-counter sink . Unscrew them with the help of a screwdriver.

If it's your lucky solar day, your sink will undo after removing these clips, and yous'll be able to get it out safely.

However, if your sink is held in place using a silicone sealant or other types of adhesive, y'all all the same have one more step to become.

Step five. Unglue your sink

For this part, y'all'll have to piece of work from above your sink. Take hold of a sharp utility knife to cutting through the adhesive by forcing information technology between your sink rim and the countertop.

If you placed your sink with silicone sealant, you'd have an easy time loosening it in simply a few passes. You need to brand that each cutting gets more profound than the previous one.

If you're dealing with a different adhesive such every bit construction adhesive or epoxy, a utility knife might not offer much aid.

You'll need a unlike approach for this problem:

Wedge a sharp chisel between the countertop and sink rim and gently tap it with a hammer. Exist careful, so you don't end up chipping your countertop material. This method will help you pause the adhesive bond and divide the sink rim.

You lot can then put a pry bar in between the gap formed and pry the rim down to disengage your sink fully.

Alternatively:

If the chisel method doesn't work, the other selection is to apply a heat gun to soften this agglutinative, after which you lot can try chipping, cut, and prying to permit costless your sink.

WARNING:  Don't employ the oscillating tool to cut through the agglutinative if your countertop is granite , quartz, or stone. The vibrations from this tool can easily crack your expensive countertop and force you lot to supervene upon it with a new one. This tool is, withal, safe for employ with wood and other solid tops.

Conclusion

Removing an undermount sink in your bathroom to pave the way for a new sink is simple if you know how to exercise it correctly. The bones steps we accept outlined here will help you quickly and safely remove your undermount sink. These steps employ to all the types of undermount sinks installed on diverse countertop materials.

gilfordfinever.blogspot.com

Source: https://thewindupspace.com/how-to-remove-an-undermount-bathroom-sink/

Share this post